数控内圆端面磨床

CD80数控内圆端面磨床    机床主要特点：

●CD80为二轴联动数控内圆端面磨床,控制系统采用西门子808D , - -次装夹可完成零件内孔(阶梯孔)及端面(凹或凸)的

磨削,通过调整床头角度可磨削内锥孔。

●采用弹性薄膜夹具，以工件的节圆和端面或外圆定位,循环动作(进给、砂轮修正、补偿、尺寸控制)均自动完成。

●机床设置自动循环和手动调整二种工作方式。

●内孔尺寸控制采用定程磨削或主动测量仪(选配)在线测量,控制端面尺寸控制采用定程磨削。

●进给、往复x、Z轴导轨采用直线滚动导轨或滚柱导轨,丝杆采用滚珠丝杆。

●采用全封闭罩壳,背包式电器箱和前置回转式操作台,结构紧凑.占地面积小。

●配移动式手持单元,方便调整及零件对刀使用。

●CD80 is a CNC internal and end face grinder with linkage of two axles.Itscontrol system isSiomens(808D)numerical control systemn;it can finish the grindingof coponent inner bores(stepped hole)and end face(concave or convex)with one

●The grinder uses elastic film fixture,with positioning by pitch circle and end faceofworkpiece,the cycle actions(feeding,grinding wheel dressing.copensation,andsizocontrol)all can be automatically copleted.

●The grinder owns two operation modes, namely,automatic cycle and manualadjustmont.

●The size of innor bore is controlled by fixed-distance grinding or on-linemeasurement of in-process measuring instrument(optional).The size of end faceiscontrolled by fixed- distance grinding.

●Guide rail of feeding and reciprocating X and Z axles adopts linear rolling guide,andlead screw is ball screw.

●The grinder uses fully closed housing,knapsack electrical box and front rotaryconsole with copact structure and limited area.

●The grinder is equipped with  handheld units to facilitate the adjustment andcoponent tool setting ,

CD80数控内圆端面磨床   主要用途及适用范围：

●本机床主要用于盘类、-轴类( 或类似零件)的内孔、端面的磨削加工。是新一代经济型高精度、高效率的生产型机床，该机床适用于盘类、套类等零件的批量生产。

( The grinder is mainly used to grind the inner bore and end face of platesand axels (or similar coponents).As a new production machine wtih highprecision and high efficiency ,the grinder applies to the mass production ofcoponents such as plates ,sleeves and So on.

CD80数控内圆端面磨床  加工精度

圆度      Roundness:       0.002mm

圆柱度   Cyindricity:        0.003mm

粗糙度   Roughness:

内孔      Lner bore.         Ra:0.32 μ m

端面      End tace:          Ra:0.40 μ m